To connect the individual components of the cooling water, choosing the rightconnections, and providing sufficient number is essential. Otherwise, the installationquickly became a frustrating experience if the Assembly fails at the wrong or a few jointsand delayed due to this.
Bitspower this provides a comprehensive range that caters for all claim the right solution- whether adapters, direct hose connections, or angular distribution. The execution issolid and each has a sealing ring. This leaves the connections tight and ensure high long-term durability.
This is an angled 90 degrees 1/4 inch connector (fitting) for hoses with 3/8 inch inner diameter and 10mm in the real hi-flow design. Since no nut is used, any tube thicknessand thus outside diameter are used. For added flexibility, the rotating mechanismensures on the part of the 1/4 inch thread. The site has two, Bitspower sticker - an additional gimmick for modders with an eye for detail.
Note: For better and more secure fit we recommend using a cable tie or hose clamp.Furthermore, the rotation function of the connections are always used in the expandedstate, as this is by design relatively stiff. When installed, no force should be applied toports in order not to damage the connectors themselves and the attached cooler.
Technical details:
Material: Nickel-plated brass
connections:
Size: 1/4 inch
Tube: 10 mm (internal diameter)
EAN: 4711946741501
